Leica M8 Instruction Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
82 / Comprehensive instructions/Preparations
Comprehensive
instructions
Preparations
Attaching the carrying strap
Charging the battery
The LEICA M8 is powered by a Lithium ion battery (A).
Attention:
• Only the battery type specified and described in
this manual, and/or battery types specified and
described by Leica Camera AG, may be used in this
camera.
• This battery may only be used in the units for which
it is designed and may only be charged exactly as
described below.
• Using this battery contrary to the instructions and
using non-specified battery types can result in an
explosion under certain circumstances.
• Never throw batteries into a fire as this can cause
them to explode!
• The charger supplied should be used e
xclusively for
charging this battery type. Do not attempt to use it
for other purposes.
• Ensure that the mains outlet used is freely accessi-
ble.
• The charger may not be opened. Repairs may only
be carried out by authorized workshops.
Notes:
• The battery should be charged before the LEICA M8
is used for the first time.
• The battery must have a temperature of 0°-35°C/
32°95°F to be charged (otherwise the charger will
not switch on, or will switch off again).
• Lithium ion batteries can be charged at any time,
regardless of their current charge level. If a battery
is only partly discharged when charging starts, it is
charged to full capacity faster.
• The batteries warm up during the charging process.
This is normal and not a malfunction.
• If the yellow
CHARGE
LED (1.43) flashes after
charging has started, this indicates a charging fault.
In this case, disconnect the charging unit from the
mains and remove the battery. Ensure that the
above temperature conditions are met and then
restart the charging process. If the problem per-
sists, please contact your dealer, the Leica office in
your country or Leica Camera AG.
• A new battery only reaches its full capacity after it
has been fully charged and – by use in the camera
discharged 2 or 3 times. This discharge procedure
should be repeated every 25 cycles. To ensure a
maximum service life of the battery, it should not be
exposed to constant extremes of temperature (e.g.
in a parked car in the summer or winter).
• Even with optimum conditions of use, every battery
has a limited service life! After several hundred
charging cycles, this becomes noticeable as the
operating times get significantly shorter.
!
12a2b
345
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

Comments to this Manuals

No comments