Leica 106Z User Manual download pdf (Page 21)

Important: With the illuminator on, insert the filterhol-

der with diaphragm into slide-in unit 3 to avoid being

suddenly exposed to excessively bright light (page 22).

▶ Remove the binocular tube.

▶ Loosen the 3 socket-head

screws.

▶ Remove the cover.

▶ Loosen the fastening

screw and take out the

filter carrier.

▶ Insert the desired filter

carrier. Fit both of the

two guide pins in the

fluorescence module into

the holes on the filter

carrier.

▶ Tighten the fastening

screw securely.

▶ Replace the cover and

tighten the 3 socket-head

screws securely.

▶ Replace the binocular tube.

▶ Insert a suitable exciter filter (page 22).

▶ Take out the filterholder with diaphragm.

▶ Re-adjust the light source (page 15).

Stereo-fluorescence module

Focusing drive ➜ base of stand

▶ Connect manually-operated or motor-driven focusing drive,

complete with column, to base, as described in user manual

M2-105-0EN.

Before using the motor focus, you must read

the safety directions in the accompanying user

manual M2-267-104.

For the Leica stereomicroscope models MS5, MZ6, MZ8, MZ12,

MZAPO with manual focusing drive, fit the micro scope in

the upper position on the focusing drive (refer to user manual for

stereomicroscope).

Fluorescence module ➜ stereomicroscope

• Assembleinthefollowingorderwithoutdouble-irisdia-

phragm: Optics carrier, fluorescence module, bin ocular tube

or phototube

• Assembleinthefollowingorderwithdouble-irisdiaphragm:

Optics carrier, double-iris diaphragm, fluorescence module,

bin ocu lar tube or phototube

▶ Align the fluorescence module on the optics carrier so that

the adapter for the lamp housing points backwards at

about 45°

▶ Continue assembling in accordance with the user manual for

the stereomicroscope (see section “Fitting accessory tubes”)

Video-/phototubes

The fluorescence illumina tion is directed along the left-hand

beam path and could cause hot-spots in the image. Therefore:

▶ PositiontheHUphototubeovertheright-handbeampath.

Changing the filter set

Removable filter sets that can hold various filters are available for

the fluorescence module. A filter set consists of a filter carrier

with barrier filter and of a filterholder with excitation filter.

If you wish to change the filter set while you are in the middle

of a task, leave the illuminator switched on so that you will

not have to wait for the lamp to cool (page 12) before continuing.

1 2 ... 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Leica 106Z User Manual Page 21

Comments to this Manuals

Related products and manuals for Microscopes Leica 106Z