Leica GS20 User Manual Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
Setup
Leica GS20 Field Guide-1.1.0en
73
3. CQ Warning (Coordinate Quality): Even if Point Autostop
is set to none, a notification alarm can be set to alert the
user that the defined quality has been exceeded.
Line Quality
1. Defines the horizontal quality tolerance for linear
streaming.
Tip: The Line Quality can be used to filter or just notify the
user of positions that exceed quality. This setting can
be found in the Streaming Options in Data Collection.
9.8 Interfaces
The Interface su/jointfilesconvert/45268/bgroup controls how external devices interact
with the Leica Geosystems GS20. The Interfaces can be
further subdivided into Real-Time, Offset Devices, and NMEA
Output.
9.8.1 Real-Time
Real-Time or “Differential” correction allows a GPS to use a
known reference position to correct the less accurate
autonomous position. The Leica Geosystems GS20 supports
two combined message formats of the RTCM "Radio
Technical Commission for Maritime services" standard.
RTCM (9,2) (1,2) (18,19) and (20,21).
Several default devices are available for Real-Time Interface.
RTB: CSI Real Time Coast Guard Beacon.
RTS: Racal LandStar Satellite Subscription Service.
RS232: An open standard for 3rd party devices.
•GSM
Modem Devices
To view or edit the properties of the device being used, Select
Menu and choose 2
Device Properties.
Tip: Additional properties unique to a device such as the
RTB (Frequency, Bit Rate) and RTS (Channel and
Station) can be defined by the user in Device
Properties.
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 99 100

Comments to this Manuals

No comments