Leica R6.2 User Manual download pdf (Page 11)

Pull up the rewind crank as far as it will go

and insert the film cartridge in the empty

cartridge chamber, then push in the rewind

crank. The edge of the film must be parallel

with the film guide. As you move the quick-

wind lever, the sprockets of the transport

drum must engage in the edge perforations

of the film.

Use the quick-wind lever to wind the film

one frame forward, to ensure that it lies

tensioned in the film guide and that the

mouth of the cartridge does not project too

far.

You may occasionally wish to take out a

partly exposed film and later insert it again.

To ensure that the film is always inserted

under the same conditions, use the quick-

wind lever to cock the shutter, then release

the shutter before you insert the film.

Snap the camera back shut to close the

camera. Release the shutter. Wind the film

one frame forward, release the shutter again,

hen wind on one more frame. The camera is

now ready for use. The frame counter

stands at 1. It counts up to "36". To indicate

the various lengths of film available, the

figures "20", "24", and "36" are marked in

red.

Important!

Bright light may enter through the mouth

of the cartridge and damage your film.

Never insert a Him in bright light.

Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

No comments

Leica R6.2 User Manual Page 11