Leica M205 User Manual download pdf (Page 32)

Leica M series Manual 32

The base is delivered with the adapter plate

installed. The selected stage (IsoPro™ cross-

stage or standard stage 10 447 269), and the

focusing drive will have to be mounted later.

Ensure that the instruments are unpacked on a

level, adequately sized, and nonskid underlay.

Stage assembly

The transmitted-light base TL RC™/ RCI™ can

be equipped with three diﬀerent stages. The

selected stage is mounted on the base before

commissioning. You can switch between the

stages at any time with just a few hand move-

ments.

The following paragraph assumes use of the

base without the stage mounted. Disassembly

is performed in reverse order of the following

steps.

Standard stage

1. Take the glass plate from the rectangular

gap in the standard stage.

2. Position the stage on the transmitted-light

base in such way that the four holes align

over those in the base.

3. Attach the stage to the base using the four

Allen screws provided.

4. Insert the glass plate back into the standard

stage.

TL RC™ / TL RCI™

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 113 114

No comments

Leica M205 User Manual Page 32