Leica V-lux 3 Instruction Manual download pdf (Page 166)

Connecting to other equipment

- 166 -

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to

be printed out and instruct that printing be started on the camera’s monitor.

•

Picture series will be displayed as a list, and not as a group.

• Some printers can print directly from the card removed from the camera. For details, refer to

the instructions of your printer.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures in the internal memory.

Perform the print quality and other settings at the printer before printing the pictures.

Connect the camera to a printer via the USB connection cable A

(supplied).

Press 3/4 to select [PictBridge(PTP)], and then [MENU/SET].

Notes

•

Do not disconnect the USB cable while [å] (Cable disconnect prohibit icon) is displayed.

(may not be displayed depending on the type of printer used)

• Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

• Before inserting or removing a card, turn the camera off, and disconnect the USB connection

cable.

• Motion pictures recorded cannot be printed out.

A USB connection cable (supplied)

• Make sure the plugs are aligned correctly and that they are inserted straight. (Otherwise the

connectors may be bent out of shape which may cause trouble.)

B Align the marks, and insert.

• Use a battery with sufficient battery power. If the remaining battery power becomes low while

the camera and the printer are connected, the status indicator flashes and the alarm beeps. If

this happens during printing, stop printing at once. If not printing, disconnect the USB

connection cable.

MIC

REMOTE

AV OUT/DIGITAL

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 195 196

No comments

Leica V-lux 3 Instruction Manual Page 166